User has lost or forgotten the login credentials for managing the access point (AP) Default login is not working; Hard-reset of the access point is required. If the GW is reachable it will act as a Root-AP.
I could be working in the same area, not moving, under an access point, and my machine would just stop resolving the Internet. Roaming from a 310 back to a 710 doesn’t cause an issue, though. I bought a few AC adapters for our R500s just to be sure.Manually disable all mesh networking, including outdoor AP's, except the AP's that are actually needing to use it.On the HP Switches, it is not enough to tag the VLANS you want on those ports with AP's, you must also FORBID all VLANS that are not being used on the ports with the AP.These problems will then go away. Ruckus Best Practices.
Q: My Wi-Fi device successfully connects to Configure.Me_xxxxxx WLAN but the device cannot reach the Unleashed AP's web UI.
We’ve also changed the BSS Min Rate to different values so that clients find different APs as they roam through our campus.Excluding the wireless element at the moment, have you ruled out duplicate IPs? Pinging from the client to the AP, Default Gateway, Core Switch, ZD, or outside to a website is intermittent. This Application is available for both Android and iOS platform users.
Are you suppressing broadcasts (not sure if Ruckus does that but probably)?Have you looked at the wireless captures to see if there is any device that is taking up most of the airtime? EOL FastIron, ICX & Mobility Products. Otherwise, the devices will be not correctly integrated with the Solution.The parameters to use to integrate the device with the Solution are the following:If these parameters change in the future, we will promptly inform you about new values. Products: Ruckus Unleashed; configure.me-xxxxxx network not available Me Too.
This occurs at very random times, is not reproducible manually, and at least happens once or twice a day to the various areas. The Island SSID is normally broadcasted when the AP looses connection to a Zonedirector.Ok. What should I do? I'd also turn on any multicast filtering that Ruckus has to test too.Have you ruled out network issues?
We're a BYOD campus but the areas this is happening have pretty light traffic.As for the analyzer part, a Ruckus rep came out and tested with one of those.
Rule of thumb is to always check cabling. If you have Unleashed networks deployed across multiple small sites, Unleashed Multi-Site Manager is the one-stop solution for management, monitoring and reporting.
I am using windows 10 laptop which is recently bought.
If can find out the IP address of ANY of the unleashed APs and go to https://< I P address> you will get to the unleashed login page. 5 R310 was not working right on arrival and Ruckus won't support this Amazon Merchant My client bought an R310 Unleashed AP from this Amazon Vendor that "pretends" to be Ruckus Wireless, just look at their name. Could be channel changes and clients just dropping off and reassociating every 10-15 minutes?We’re not using channelfly. Ruckus ICX Switches. Cisco, Juniper, Brocade and more all welcome.Press J to jump to the feed. However I took them home over the weekend and tried there, but hit the same issue. Ruckus Unleashed. Follow. Virtual SmartZone (vSZ) ... Ruckus Network Director (RND) FlexMaster. EOL FastIron, ICX & Mobility Products.
Diagnostic Dashboard (RDD) Ruckus SPoT.