Being directly connected, the lock knob rotates with the clamp and if a hand is holding the knob in a fixed position, the tightness adjusts slightly when the lens is pivoted up or down. Anyone who used a traditional monopod head, even the pricey Really Right Stuff one, will know that the locking knob on those heads feels much more like an on/off switch. Adding a head to a monopod increases this support's versatility and the Wimberley MH-100 MonoGimbal Gimbal Monopod Head is an optimal choice. Only two fingers are needed to move a setup such as the I can confirm that you are able to pass time on the sidelines by using this mount like a Or, would you feel more comfortable buying after having a hands-on trial period? My 200-600 seems to be fine for example. With the tripod approximately leveled, the platform elevation knob very tight and the elevation friction knob very slightly loosened, Bringing you this site is my full-time job (typically 60-80 hours per week). Great product Made in the USA. Thus, gravity pulls the setup into a level position. Renting is fast and easy. Note then that to use a monopod head effectively, you must be using it with a lens that has a tripod collar. If you rotate the ball head on its pan base, with the lens hanging off the side on the MonoGimbal, you will alternately go through angles where the setup is very stable when the camera is directly above an outstretched tripod leg, and then considerably less stable when it is between two tripod legs. I'd get mine at Adorama (WH-200 head and/or P50 plate), at Amazon (WH-200 head or P50 plate) or at B&H (WH-200 head or P50 plate). I didn’t ask Wimberley for a review sample of the Ball heads are no good at all on monopods, they have too many axis of movement. I slipped and something had to be dropped to free a hand to steady myself. Two of these are used to setup the lens/body combo (they remain tight during use) and two are used for adjustments during use. Schedule your rental now:(Using the links on this site to make any purchase provides Wimberley MH-100 MonoGimbal Gimbal Monopod Head Review After unscrewing the normal ball head (if you don't have the luxury of a dedicated tripod), the Tripod Head II screws onto the tripod legs in its place. Mounting on the right side of the lens clears the camera and lens for two-handed use, similar to handholding. While monopod heads make shooting at upward or downward angles far easier, they offer benefits even when the camera angles are remaining level. - Bryan Wimberley is certainly the snazzy looking gimbal head, but in fact I have never seen any valid testing done to verify whether it is functionally better than other designs. This means you need a specific monopod head that limits some range of motion when unlocked, and traditionally these have been built around a tilt head design. His editorial work has been featured in publications all over the world, and his commercial clients include brands such as Nike, Apple, Adobe and Red Bull. It is a good value. The retailers I recommend below are the ones I trust for my purchases. These are typically one-way heads with a single locking knob. The build quality of the MH-100 is excellent. If you are using the very heaviest setups such as a pro-sized camera and a 600mm lens, it could very well be enough weight to tip the tripod over in this configuration.
To setup the Tripod Head II ... Shooting an air show with a big lens? Well, the tripod went and all I heard was the Wimblerley smacking off the wet rocks. With a one-way monopod head in use, the monopod can be rotated for panning, tipped side-to-side for leveling, and the head movement provides for the needed up-down shooting angle. Balancing is important and once done, your camera/lense will move easily with 1 finger and maintain it's position anyway you point. Shooting field sports? While tripods support a camera from three sides, monopods require the photographer to hold their own body still, essentially providing the other two sides of the support. Rotating the lens in the tripod collar maintains the level camera position. Renting is fast and easy. This can happen fast and hard enough to cause damage (including causing a painfully-bloodied hand as I've personally experienced). Those numbers all add up to one tuff little head. The top/side knob controls the elevation adjustment friction. This 100% all-content, no-ad website's biggest source of support is when you use those or any of these links to my pe… But probably not by a huge amount. Do you need/want the Wimberley WH-200 Gimbal Tripod Head II for only a short period of time? Rent the Wimberley MH-100 MonoGimbal Gimbal Monopod Head I primarily use it with my Sigma 500mm F4 Sport lens. Or, would you feel more comfortable buying after having a hands-on trial period? Schedule your rental now:(Using the links on this site to make any purchase provides Wimberley WH-200 Gimbal Tripod Head II WH-200 Review Another knob allows adjustment of the platform elevation (moves the mounting clamp up/down in relation to the elevation pivot point).
Better friction materials and tighter tolerances (no play) make the Tripod Head II smoother to operate.